Related Links

AC Assembly Complete
AC Compressor
AC Compressor Clutch
AC Condensor
AC Condensor Fan
AC Evaporator
Air Bag Complete System
Air Bag Control Module
Air Bag Driver
Air Bag Passenger
Air Box Air Cleaner
Air Flow Meter
Air Ride Compressor
Alternator
Anti Lock Brake Computer
Anti Lock Brake Pump
Axle Assembly Front
Axle Assembly Rear
Axle Beam Front Driver
Axle Beam Front Passenger
Axle Beam Rear Driver
Axle Beam Rear Passenger
Axle Shaft Front
Backup Light
Blower Motor
Brake Rotor Drum Rear
Brake Rotor Front
Bumper Assembly Front
Bumper Assembly Rear
Bumper Cover Front
Bumper Cover Rear
Bumper Impact Absorber Front
Bumper Impact Absorber Rear
Bumper Reinforcement Front
Bumper Reinforcement Rear
Caliper Driver Front
Caliper Driver Rear
Caliper Passenger Front
Caliper Passenger Rear
Camshaft
Carrier Assembly with Gears
Carrier Case Only
CD Player Radio
Chassis Control Computer
Clock Gauges Instument Cluster
Column Switch
Computer Box Engine
Condensor Radiator Cooling Fan
Control Arm Front Lower Driver
Control Arm Front Lower Passenger
Control Arm Front Upper Driver
Control Arm Front Upper Passenger
Control Arm Rear Lower Driver
Control Arm Rear Lower Passenger
Control Arm Rear Upper Driver
Control Arm Rear Upper Passenger
Conv Top Lift
Conv Top Motor
Cooling Fan Rad and Con
Crank Pulley

Categories

Auto care
Automotive GPS Navigation
Car Brake System
Car Exhaust System
Car Filters
Car Fuel System
Car Insurance
Car Lighting
Car Suspension
Car Tools and Equipment
Devices
Engine Cores
Exterior Car Accessories
Ignition Parts
Interior Car Accessories
Rentals and Sales
Select Brands
Select Part
Shocks and Struts
Showroom
Sized vehicles
Tires
Truck Accessories
Used Car Parts




CPSC: Bumbleride Indie Strollers Recalled for Fall Hazards; Injuries Reported

02/06/2012 // WPB, FL, USA // Injury Lawyers News // Nicole Howley

San Diego, CA — Bumbleride Indie & Indie Twin Strollers are being voluntarily recall ed by Bumbleride Inc., Health Canada and the U.S. Consumer Product Safety Commission (CPSC) for fall hazards the product poses to consumers. The CPSC announced the nationwide product recall on February 3, 2012.

The recall was issued after discovering that the front wheel can break at the axle hub, which can cause the stroller to tip over and pose a fall hazard to young children.

Bumbleride has received two reports, among the 36 incidents, in which a stroller tipped over and resulted in minor injuries.

“The recalled Bumbleride Indie strollers are model numbers I-107, I-110 and I-205 with a DOM (Date of Manufacture) from January 2009 through August 2011 sold in multiple colors. The DOM (Date of Manufacture) can be found on a white rectangular sticker affixed to the side of the seat frame. The recalled Bumbleride Indie Twin strollers are model numbers IT-108, IT-111, and IT-305 with a DOM (Date of Manufacture) from January 2009 through August 2011 sold in multiple colors. The DOM (Date of Manufacture) can be found on a white rectangular sticker affixed to the underside of the handle,” reported the CPSC.

Terex double for Max Bögl

“The fact that the Terex AC 350/6 (pictured below) is the most powerful crane in its class made it ideal for our purposes. The unit’s maximum hook height and the corresponding lifting capacity on the main boom and the strong fixed jib were—quite literally—powerful arguments when it came to making a decision,” explains foreman Herbert Wieseckl , who works at the Max Bögl Group’s Heavy Equipment for Building Construction department.

The first of the two cranes was handed over at the Terex Zweibrücken location in November 2011. Sales representative Philipp Maurer handed over the AC 350/6, with the configuration requested by the customer (a 51 meter long main boom and a strong fixed jib), to crane operator Klaus Schmidt from Max Bögl GmbH. A few days later, Schmidt received the second crane, featuring the exact same configuration, and took it back to Nuemarkt.

The two Terex cranes

How to replace Front axle assembly / Front wheel Bushings In a Riding Lawn Mower (MTD)

In this video i am showing how to replace front axle assembly and front wheel bushings in a riding lawn mower (MTD). The bushings are around 84 ...

Is front axles for a 1998 Pathfinder the same as an axle assembly ?

I want to buy the parts myself because having the shop do everything is too expensive. I need to know, if, an axle assembly is all it takes to fix the front axle. Driver's and passenger side, because that's what an auto parts professional rep. told me.


you need to go a wrecking parts yard and buy a used assembly

it will be cheaper


yes,you have 2 front axle assemblies.left and right.


are you replacing because the joints are bad if the wheel bearing is bad it wont fix that

Where can i buy the front axle assembly for left and right for an vw jetta 2002 gl automatic transmission?

My CV joints are broke in both sides. BUT il just go ahead and replace the whole thing!!! But i don't now from where to buy it?!


Almost any QUALITY auto parts store should have them, but stay away from the Chinese and Jap junk that they push at Autozone, O'Reillys, etc. I would rather buy used German axles than new junk!
If you really want some bulletproof ones, check out http://www.techtonicstuning.com/ they have dyno proven ones that will handle lots of HP, but are a bit more expensive!


Any auto parts store should be able to get you rebuilt axles..............md


you might want to try ebay i have found and bought alot of parts off there

FJ40 front axle assembly-birfields......are they weak?

i read in an article that the birfields are poor offroad/rock crawling assemblies, because they break easier than a dana.

is this true, or just another snubbery of japanese 4x4?


They are fairly robust, but most cruiserheads install stronger ones. If you are going to do a lot of off-roading install stronger ones. If your off-roading is through mud and sand and what not, the stock ones do well. I installed stronger ones on my 60. Yes, its snubbery of Asian 4x4's since a lot of American iron cannot hold up to what an Asian 4x4 can do.

true or false, the delphi saginaw front drive axle assembly should not be replaced as a complete assembly?



Why not??

1995 Ford F150 FWD front spindle and axle assembly?

Need a picture or illustrated parts breakdown for a 1995 Ford F150 FWD front spindle and axle assembly? I am not sure how much force to use in disassembly of the rusted spindle and if I knew for sure what disassembly was required for each part being removed as I try to get to the knuckle it will help me prevent damaging anything.
Need a picture or illustrated parts breakdown for a 1995 Ford F150 FWD front spindle and axle assembly? I am not sure how much force to use in disassembly of the rusted spindle and if I knew for sure what disassembly was required for each part being removed as I try to get to the knuckle it will help me prevent damaging anything.

I have a Hayne's manual and it doesn't give enough details nor solutions.


Best thing here is visit the nearest auto parts store and purchase a "Haynes" manual for that vehicle, and the whole procedure wil be printed along with torque specifications.
They are costing about $25.00 now, up about 5-6 dollars from a year ago.

Axle Assembly Front - News


Benz rolls out fresh luxury buses
The durable Tourismo bus showcases beauty in its class, with improved ergonomics and having a new optimised front axle for a faster and smoother travel

In search of a better ride
The single-sided design also increased stiffness and handling precision by virtue of having an integrated axle rather than the typical “quick release” front

Driving a Pickup with Electric Power Steering
Can a 12-volt EPS system can handle big weights over the front axle? Nexteer showed as a full-size Cadillac Escalade SUV with about 1000 pounds of sand

Matthew Newton reinvents his image as X Factor host
Newton's audition was said to be so good that he beat out stars including Sonia Kruger and Axle Whitehead to land The X Factor gig. and more »

2011 Ford Mustang Shelby GT500
With its performance-tuned suspension - MacPherson struts on the front and a three-link solid rear axle coupled to a Panhard bar, plus pair of stabilizers


OTC 7208A Front Hub Installer and Puller
Automotive Parts and Accessories (OTC)


OTC

List Price: $59.95
Price: $35.95
You Save: $24.00 (40%)

  • This puller can be added to a standard 5/8" thread slide hammer
  • Removes hubs on most front wheel drive cars

Timken 513179 Axle Bearing and Hub Assembly
Automotive Parts and Accessories (Timken)


Timken

List Price: $140.18

  • Increases product reliability and enhances performance
  • Transmits power without slipping
  • Made of high-quality material

Timken HA590046 Axle Bearing and Hub Assembly
Automotive Parts and Accessories (Timken)


Timken

List Price: $247.61
Price: $158.60
You Save: $31.72 (20%)


Precision 513124 Hub Assembly
Automotive Parts and Accessories (Precision Automotive)


Precision Automotive

List Price: $100.00

  • Induction hardened raceways are the current OEM design enhancing product life, performance and durability
  • Triple lip seals prevent moisture and contamination from entering the bearing
  • Hub assemblies are tested for contaminate exclusion, vibration, run out, radial/axial force and load

Specialty Products Company 499-2 Center Rod Assembly for Flange Axle Puller (Part No: 499)
Automotive Parts and Accessories (Specialty Products Company)


Specialty Products Company

List Price: $43.95
Price: $34.15
You Save: $9.80 (22%)

  • Bolt circle range: 4-1/2 inch to 5-1/2 inch
  • Flange axle puller can be used as a regular wheel puller or hub puller
  • Center Rod Assembly for Flange Axle Puller