rebuilt Honda generator engine after being completely seized from no oil

a Honda generator that i completely rebuilt after being started up with no oil in the sump (running at 3000rpm), the piston and rings was seized ...

I have a 1999 Honda accord non-vtec 2.3L it has a seized engine,can i put a vtec in without a lot of trouble?

Jun 15, 2007 by Annie m | Posted in Honda

I just need a little honda accord engine 101 if any one can help me out. I have a 1999 honda accord DX 2.3L 4 cyl standard trans. What can I put in that somewhat easily for an engine, and whats the difference between vtec ULEV and non ULVE and how do I know if a JDM motor would work? I am so clueless...I know I sound kind of stupid, but I swear I'm not an air head! I just need a little direction here. Thanks alot.

i cant speak of accords but i know when u swap vtec for nonvtec in civics, there are some sensor connection issues. in the civic engine d16y7 and d16y8(vtec) the only diff in the engines is the head/valves. u might want to check out honda-tech.com and hondatuningmagazine.com to see if they can offer u some good insight.
what is with that guy always bashing on hondas. look guy, they are assembled here in ohio. american cars: gm-owns big chunk of toyota. ford owns volvo, big chunk of mazda. chrysler owns chunk of mitsubishi. its not like anything is pure america anymore. i feel your fervor to buy american but the truth is , nothing is totally american anymore.

I bought two old Honda 350's and the engine's seem seized. With a rebuild on the engines will they come out ok?

Mar 11, 2010 by Paul R | Posted in Motorcycles

I am working on a Honda 350 cafe racer and need to be sure that one of these two engines will work after a rebuild.

How much is a 79' Honda Odyssey FL250 worth with a possibly seized engine?

Aug 24, 2008 by TheBonecrusher89 | Posted in Motorcycles

While taking down a tree while working, I noticed the neighbors had an aged, but not beaten Honda FL250 sitting next to their garage.
I didn't assume it was worth much since it was sitting outside with some bicycles stacked against it and lots of weeds growing between the frame and body.
After inquiring about the sale of it, the man told me about it, and noted that the engine was frozen.
According to him, it worked when he bought it, used it for a year, parked it after a use and a week later it would not turn over at all. From that point on, it sat for another year until now.
It's a two stroke so I suspect he might have used raw gasoline instead a mix.

How much is it worth in the state it's in?

If it were a later model 350 Odyssey with suspension, it would typically be worth $800 to $1000 in an area with sand dunes nearby.

The older unsuspended models aren't worth much at all, even when they're running.

Even a good suspended model won't sell for much unless you've got a suitable riding area nearby - if you're in the woods and all the trails are tight, they're not much fun!

Can a seized aluminum motorcycle engine be disassembled without further damage?

Jun 27, 2008 by aaronkagle | Posted in Maintenance & Repairs

I am having a hard time looking for a rebuilt crate engine for my 1982 Honda silverwing gl500i.

I think I’ll need do disassemble the engine to see which parts I need if I cannot find a new engine.

I have searched many websites and have had no luck, only to find parts sold separately.

Were might I find a place that would be useful?

There are a couple of things to try when it comes to stuck engines, 1. PB Blaster by Justice Brothers, spray in the spark plug holes and let it sit for several days {keep it saturated} then try an impact wrench on the clutch bolt with the transmission in 1st gear. This gives you some mechanical advantage over the rust. Or try www.sportwheels.com for an engine.

How do you unsize a small Honda type engine, such as 4.5HP-say an 11HP?

Nov 08, 2009 by Michael J | Posted in Maintenance & Repairs

Seized from a lack of oil.

what do you want to do?more info plz